The Sullair low pressure rotary screw drill compressor delivers capacities and pressures from a range of 375 cfm at 100 psig or 10.6 m3/min at 7 bar to 500 cfm at 200 psig or 14.2 m3/min at 14 bar. The Drill air-end is designed with a inlet control system and drive adapter to match up with drive choices. Multiple gear ratio's with matched internal volume ratio's dials in specific capacities and pressure for optimum performance.

  • 375 to 500 cfm (10.6 to 14.2 m3/min, 177 to 236 l/s)
  • 100 to 200 psig (7 to 14 bar)
  • 2100 rpm
  • Bare shafted drill air-end
  • 2-Year warranty
  • Inlet control valve (Poppet valve assembly)
  • Fluid filter
  • Oil stop valve if required
  • Housing drive adapter SAE flywheel adapter only
  • Coupling assembly
  • Inlet filter (Filter only shipped loose)
  • High Temperature shut down switch
  • Discharge check valve if required
  • Receiver Tank
  • Separator element
  • Separator fluid return line w/sight glass
  • Minimum pressure check valve
  • Fluid thermal valve
  • Pressure relief valve
  • Running blowdown valve & shut down blowdown valve
  • Coalescing control line filter
  • Control System Loose regulators
  • Gauges