The Sullair high pressure two stage rotary screw drill compressor delivers capacities and pressures from a range of 1150 cfm at 500 psig or 32.6 m3/min at 35 bar to 1350 cfm at 500 psig or 38.2 m3/min at 35 bar. The Drill air-end is designed with a inlet control system and drive adapter to match up with drive choices. Multiple gear ratio's with matched internal volume ratio's dials in specific capacities and pressure for optimum performance.

  • 1150 to 1350 cfm (32.6 to 38.2 m3/min, 543 to 637 l/s)
  • 500 psig (35 bar)
  • 1800 and 2100 rpm
  • Bare shafted drill air-end (2-Year warranty)
  • Inlet control valve (Poppet valve assembly)
  • Fluid filter
  • Oil stop valve if required
  • Housing drive adapter SAE flywheel adapter only
  • Coupling assembly
  • Inlet filter (Filter only shipped loose)
  • High Temperature shut down switch
  • Discharge check valve
  • Separator element
  • Separator fluid return line w/sight glass
  • Minimum pressure check valve
  • Fluid thermal valve
  • Pressure relief valve
  • Running blowdown valve & shut down blowdown valve
  • Coalescing control line filter
  • Control System Loose regulators
  • Gauges
  • Receiver Tank