Unmatched Performance, Exceptional Value

Sullube® is an 8000 hour Polyglycol based lubricant that has been the mainstay of the Sullair fluid family for over 25 years. Sullube® has performed flawlessly in over 50,000 compressors for more than 150,000,000 hours.

Long life expectancy—Perfect for annual change interval.

Will not form sludge or varnish—Keeps compressor operating clean and efficiently.

Removes existing varnish—Perfect lubricant for removing varnish from compressors running on hydrocarbon fluids.

Cools more efficiently—Excellent at removing heat created by the compression process.

Environmentally considerate—Compressor condensate is biodegradable.

High flash point—One of the highest fluid flash points in the industry.

Very low carryover—With less than 1 PPM carryover, less top off fluid is needed.

“Four years ago I was having a constant problem with another lubricant. My compressors were always overheating and shutting down. I operate five compressors and one summer, at least one would shut down every 15 minutes. The minimum air pressure would cause the saws to just stop. This was costing me a lot of money in downtime. I even tried to re-design the compressors to tolerate high heat. I finally decided to try Sullube® in one of the compressors. No more overheating. Well, that was four years ago and I’ve been using Sullube® in my compressors ever since. I’ve been down the ‘cheaper’ road with another lubricant and it just isn’t worth it. The advantages with Sullube® were instantaneous. I’ve never looked back.”

—Greg Palmer
Sawmill Operations, Buchanan Lumber