Calculators
 |
Altitude Correction Calculator
Enter standard conditions, site conditions (including altitude), and the specified SCFM to get the required ACFM for the site conditions and equivalent SCFM. Download (PDF)
|
|
|
|
||
 |
Energy Efficiency Systems Energy Savings Calculator
Enter information about your energy efficiency system, including compressor information and energy costs to get recoverable BTUs and energy savings. Download (Excel)
|
|
 |
FlowLogic Air Receiver Sizing Calculator
Enter capcacity, pressure, and flow information to get your recommeneded receiver size, or entry receiver size, capacity, pressure, and flow information to get your useable stored air and the total stored capacity your system can support. Download (Excel)
|
|
 |
FlowLogic Annual Energy Savings Estimator
Enter capacity, pressure, demand, energy, and operating information, and a FlowLogic controller set point to get your operating costs with and without FlowLogic and your annual savings. Download (Excel)
|
|
 |
Fluid Carryover Calculator
Enter compressor air flow, environment, operating, and fluid information to get the cost of fluid passed downstream. Download (PDF)
|
|
 |
Plant Volume Calculator
Enter present plant capacity, present pressure, required pressure, and desired laod factor to get required capcity and current shortfall. Download (PDF)
|
|
 |
Power Cost Formula
Enter BHP, hours of operation, power cost, and motor efficiency to get the conversion factor and total power cost. Download (PDF)
|
|
 |
Pressure Loss in Pipes Calculator
Enter flow, pressure, and pipe information to get pressure loss. Download (PDF)
|
|
 |
SCFM to ACFM Conversion Calculator
Enter standard conditions, site conditions (not including altitude), and the specified SCFM to get the required ACFM for the site conditions and equivalent SCFM. Download (PDF)
|
|
 |
Separator/Cost Calculator
Enter compressor, fluid/separator, and energy information to get total annual operating cost. Download (PDF)
|
|
 |
Tip Speed Calculator
Enter male rotor diameter, motor speed, and rive ratio to get the male rotor speed and tip speed. Download (PDF)
|
|